Blog details

Things to Remember When Moving Electronic Appliances in HSR Layout :

Removal of household electronic appliances is a challenge that not everyone is ready to face. Bulky furniture such as desks, tables, wardrobes, beds, and sofas are the first to think about when you have to move because they are heavy and difficult to move, but even more so are large electronic appliances that require more attention. We are talking, for example, about refrigerators, vacuum cleaners, washing machines, dryers, and much more. If you proceed with a do-it-yourself move, these problems become even more important because you have to think about everything, from disassembling to arranging to transport. There are things to remember if you want to do everything correctly and limit errors. You must start from the first, that is, large electronic appliances must be transferred from the old house to the new one only if they have been recently purchased. Otherwise, if it were obsolete electronic appliances, old with problems, they are certainly not worth the effort of moving. Things change if there are no electronic appliances in the new home and you don’t want to face a major expense after the move. What you need to transport large electronic appliances for the removal of household electronic appliances, it is necessary to have the appropriate equipment, for example, the two-wheeled trolley with a folding shovel. Then you need a set of straps for moving heavy loads; they are orange straps that facilitate movement, usually found in hardware stores. And finally, the felt pads, known as Sliders, can be used to reach the trolleys. All these tools can be rented from a moving company, or you can ask professional Packers and Movers in HSR Layout to carry out the move. Another concern is preparing household electronic appliances that need the right precautions so as not to be damaged during transport. In this case, it is recommended to use thick cardboard pieces or plastic sheets that serve to cover them so as not to scratch them. How to transport electronic appliances without damaging them As for a refrigerator, for example, unplug it at least 24 hours before the move, empty it completely, take out everything that can be removed, clean it, and finally fix the refrigerator door with tape or a rope to prevent it from falling apart open during transport. Finally, it is recommended to wrap the power cable on the back for safety reasons and wrap a cloth around the fridge on which the straps that will be used to load it on a mobile trolley in total safety will then be fixed. Washing machines and dishwashers must be well-drained and well-dried before transport. They will be less heavy without residual water inside. Secure the drain and water inlet hoses securely with tape, so they don’t get in the way when moving. An oven has many fragile parts that must be taken care of during transport. Tie the grids with adhesive tape so that they do not move, and do the same with the buttons and the wire used for the connection. For the microwave, it may be wise to remove the glass tray so that it does not break during the move. These two devices each have a window on the front that can split or break in the event of an impact. To protect the glass, affix it against a cardboard plate held in place with adhesive tape. For televisions and computers, it will, of course, be necessary to protect the screen. If you have taken care to keep the packing boxes provided at the time of purchase, the best thing to do is to put the devices back inside during transport. If you no longer have the original boxes, surround the screens with blankets.